HOW TO MAKE GUMMIES AT HOME RECIPES

Steps:

• Follow the Basic LEVO Coconut Oil Infusion recipe to get a head start by using your LEVO machine to infuse cannabinoid rich flower with coconut oil.
• This recipe requires 1/4 cup of the infused coconut oil.
• Before beginning, prep your work space and your gummy molds. Set your gummy molds on a cookie sheet (for sturdy transport) and spray them with a non-stick cooking spray. I used coconut oil spray, which will harden & absorb (and not leave a wet & oily coating over the gummies like canola oil spray did). I also combined the 4 gelatin packets into a small bowl and opened the flavored gelatin ahead of time and set them near the stove for quicker and easier mixing. Set your syringes/dispensers and whisk within reach, too.
• In a small saucepan, bring the water, infused coconut oil, and lecithin to medium heat and whisk together until fully combined (see photo below). Once the mixture starts to bubble, increase to medium-high heat for a rolling boil. Slowly add in the unflavored gelatin while continuously whisking at the same time. Do not stop whisking!!! Once the unflavored gelatin is mixed in, add in all of the flavored gelatin while continuing to whisk. Whisk together on medium-high heat for about 1 minute until fully combined and smooth.
• Turn down heat source to low heat while continuing to whisk. Mixture should still be bubbling, but not boiling. Working very quickly, begin to fill your molds. Stir the mixture every so often to recombine. Mixture will continually get thicker and thicker as the gelatin sets, so you only have a few minutes to fill the molds.
• Once the mixture is used up, place the molds in the freezer or refrigerator for the gummies to harden, about 20 minutes to an hour. Once completely set, pop them out of the molds and store in an air-tight container in the refrigerator until ready to enjoy.
• Share what you make with @LEVO_Oil and be sure to tag it with #LEVOmade.

Steps:

• Turn your stove on low heat. In a pot, add water, the cannabis-infused coconut oil, and the sunflower/soy lecithin.
• Continue stirring the mixture until it has a consistent texture and the coconut oil has completely melted. Now, add in the flavoured gelatin and the unflavoured gelatin while continuing to stir throughout this process.
• Whisk extensively on low heat for 10-15 minutes until the gelatine is completely dissolved. Make sure it does not come to a boil. But, you need to make sure that all the ingredients are thoroughly combined. (Don't stop stirring this mixture for the entire 15 minutes)
• While leaving the pot on the element, start filling up the gummy bear moulds with a dropper (a dropper is a mini turkey baster that comes with most gummy bear moulds). Make sure to move quickly. If your liquid starts to separate, it's because the mixture has started to cool. It's critical that you move fast otherwise the oil may separate in the pot. You need to continue whisking throughout the pouring process otherwise the mixture may start to harden and stop binding. (The secret to making great infused gummy bears is pouring the mixture into the moulds as fast as possible.)
• Put the gummy bear moulds into the freezer for 20-25 minutes. (Pro tip:  lift the mould 2 inches off the table and drop it. This will let the mixture fill any air pockets.)
• Bon Appetite!