ROUND STEAK BEEF JERKY RECIPES

Steps:

• Place meat in a zip-top bag and freeze for 1-2 hours to firm up the meat for cutting.
• Slice the meat against the grain into 1/8 inch - 1/4 inch strips.
• Mix remaining ingredients in a zip-top bag, then add steak and coat well. Marinate in the refrigerator for 3-6 hours.
• Remove the meat and pat dry. Divide the steak strips onto the cooking trays in an even layer.
• Place the drip pan in the bottom of the cooking chamber and insert one cooking tray in the top-most position and one tray in the middle position.
• Using the display panel, select DEHYDRATE, then adjust the temperature to 160 degrees and the time to 3 hours, then touch START.
• At 1.5 hours, switch the trays.
• When the Dehydrate program is nearly complete, test a piece of jerky by bending it at a 90-degree angle.
• If any moisture seeps out, return for an additional 20-30 minutes. If it bends, but there is no moisture seepage, it is done. If it cracks and breaks, it is overdone.

Steps:

• Thinly slice the meat* and cut off all visible fat.
• Pound slices with a meat tenderizer mallet until pieces are uniform thickness (aprox nickel width).
• Place the beef strips in a zip-top bag. Mix remaining ingredients and pour over beef.
• Cover & marinate for 12-36 hours. Shake the bag a few times as it's marinating to make sure the beef is evenly coated.
• Spread the meat in a single layer, shaking off any excess marinade, on the dehydrator trays.
• Dry at 165F/74C for 4-6 hours, occasionally blotting off any fat droplets that appear on the surface. Test using a cooled piece. Properly dried jerky, when bent, should crack but not break.
• Package jerky in and air-tight container or vacuum seal (*see storage notes below). Store in a cool, dark & dry place.