GLASS SOURDOUGH STARTER STORAGE JAR RECIPES

Steps:

• Making the starter:In a clean jar, weigh out 50 grams each of whole wheat flour and water. Mix well. Put a rubber band around the jar at the height of the starter to give a visual indication when the starter has risen. Cover the jar loosely with a glass or plastic lid, or a clean napkin secured with a rubber band.Set the jar aside in a warm spot out of direct sunlight for 24–48 hours.First feeding:Check the starter after 24 hours. If there is no change except for a bit of grayness on top, wait another 24 hours. Once you see any activity (bubbles and/or increase in volume), it's time to feed the starter!Mix together a 50/50 blend of whole wheat and organic all-purpose flour. This will be what you feed your starter with!Discard half of the starter. Add 50 grams each of the flour mix and water. Stir very well, cover loosely, adjust the rubber band if needed, and set aside as before.Second feeding:After 12–24 hours, you should see some activity in your starter (bubbles and increase in volume). Discard all but 50 grams of the starter. Add 50 grams each of the flour mix and water. Mix very well, cover loosely, adjust the rubber band if needed, and set aside as before.Subsequent feedings:Feed exactly the same way as the second feeding.Continue feeding your starter every 12–24 hours until it doubles in volume every 8–12 hours, has a pleasant, yeasty smell, and passes the float test (see note). Once it passes the float test, your starter is ready to be baked with!The whole process of getting your starter established can take anywhere from 5–10 days. Be patient and use your eyes, nose, and the float test to determine if it's ready.You can switch to feeding the starter organic unbleached all-purpose flour if you like. Continue feeding your starter once a day for a total of 2 weeks. Keeping your starter in the refrigerator:At this point you can start storing your starter in the refrigerator: Feed your starter one last time, let it sit at room temperature for about half an hour, then place it in the refrigerator. Feed your starter at least once a week: Take it out of the refrigerator and let it sit at room temperature for about an hour. Discard all but 50 grams of the starter, and feed with 50 grams each of flour and water (or however much you need for your recipe). You can either let the starter sit until it doubles and passes the float test (to use in a recipe), or just let it sit for half an hour and stick it back in the fridge.Keeping your starter at room temperature:You can store your starter at room temperature indefinitely if you make sure to feed it almost every day. A missed day here and there won't hurt an established starter, but if you starve it too long, it will die.Note: For the float test, drop a small amount of starter into a glass of room-temperature water. If it floats, the starter passed the test! If it sinks, you either need to let the starter sit longer to develop more bubbles, or feed it again and let it sit until it passes the float test (usually 6–12 hours).

Steps:

• In a wide-mouth jar, stir together all ingredients until well combined. Cover and keep jar in a warm part of your kitchen, ideally about 78°, away from direct sunlight. 
• Every day at roughly the same time, discard most of the starter mixture and keep only 30 grams (about 2 tablespoons), then feed the starter with equal amounts of flours and water.
• Continue discarding and feeding the starter every day until you see activity: there should be bubbles visible, the starter will appear more airy, and the smell will turn sweet, yeasty, and slightly acidic. This process will take 5 to 7 days. On warmer days, the starter might require two feedings per day. 
• Once your starter is active, it usually peaks and becomes “ripe” for use about 6 to 8 hours after a feeding. To determine ripeness, it should look puffy, bubbly, active, and pass the float test: fill a small bowl with lukewarm water and drop a scant tablespoon of starter in. If it floats, you are good to go!