CHAR BROIL ELECTRIC SMOKER INSTRUCTIONS RECIPES

Steps:

• Mix the water and ingredients together in a large pot. Bring the mixture to a boil to help dissolve the salt and sugar. Remove from heat and let cool in the fridge for 3-4 hours.
• Rinse the salmon fillet in cold water. If the salmon still has skin, remove it at this time.
• Cut the salmon into 3” wide by 4-5” length strips. I find this is an ideal portion size and the smoke penetrates the salmon evenly.
• Once the brine is cooled place the salmon into the large pot of brine. Cover and refrigerate for 8-12 hours.
• After the brining process, remove the salmon and lightly dry it. Place the salmon on some racks and let sit on the counter for 4 hours. This lets the salmon dry evenly and creates a shiny skin called pellicle. This is a crucial step because the smoke will adhere to the salmon properly.
• Preheat your smoker: I start my smoker at 100F. I typically use maple wood for smoking Salmon.
• Once the smoker is ready I lightly oil the grills so the salmon will not stick. Place the salmon in the smoker for two hours. After the two hours move the smoker temperature to 140F and smoke another two hours. Then turn the smoker to 175F and smoke for two more hours. This is a total of six hours.
• If your smoker can not operate at such a low temp, smoke the salmon for 4-5 hours at 165F, or 3-4 hours at 225F.
• Remove the salmon and place on racks to cool on your counter. Rest for one hour. After the resting, you are ready to enjoy. Refrigerate the remaining portions.

Steps:

• Rinse the ribs in cold water and pad dry. Trim any excess fat or connective tissue. Only leave what you want to eat. 
• On the bone side of the ribs, remove the membrane. A quick trick is using a piece of paper towel to help grip the membrane. Once you get a good grip of the membrane, simply pull until it is completely removed.
• Once the ribs are prepped, I apply my favorite rub generously. Make sure to cover all the sides and edges of the ribs.Cover the ribs and keep in the fridge for 2 hours or more. 
• Remove the ribs from the fridge and allow to warm slightly on the counter. Fire up the smoker to 225F. I use Pecan or Cherry, when smoking ribs. 
• Once the smoker is at proper temp, place the ribs on the grill meat side up.
• Now you can pretty much wait for the three hours to pass or some fanatics prefer to spritz their ribs every 30-45 minutes with a 50/50 mixture of apple cider vinegar and water. Adding moisture to the ribs aids in a smoky bark. After three hours, remove the ribs and place each rack meat side up on a large piece of Heavy Duty tin foil. 
• Brush melted butter over the tops of the ribs then followed by brushing the melted honey. You can spritz the ribs for extra moisture at this time. Flip the racks around so the bone side is facing up. Brush with melted butter and melted honey. 
• Leave the racks bone side up and wrap the ribs tightly. Place back on the smoker bone side up for 45-60 minutes. Keep the temp at 225F. Optional: If you want the ribs more tender or closer to fall of the bone, cook in the foil for 1.5-2 hours.
• Remove the ribs from the foil and place back on the grill. Brush the ribs with your favorite bbq sauce. Cook for approximately 30-45 more minutes at 225F.
• Check for doneness by using your grill tongs and pickup up the ribs and give them a slight bounce. If the meat starts to slightly split, the ribs are done.Remove from the smoker and cover in foil. Let rest for 10 minutes. 
• Be a professional and take a sharp knife (I use a Henkel Serrated Bread Knife) and cut each rib individually. You’ll notice how the ribs don’t fall apart as you cut. Also look for that beautiful pink smoke ring.