PERFECT FRIES RECIPES

Steps:

• IMPORTANT: Please be careful when frying with hot oil. Keep the pot on the backburner so little kiddos won't get hurt.In a nutshell, here it is: Soak potatoes, dry potatoes, fry potatoes, drain potatoes, then fry again! Peel and rinse the potatoes, then cut them into sticks by cutting the potato in four or five vertical pieces, then cutting each piece into sticks. Place them in a large bowl and cover with cold water, then allow them to soak for two or three hours. (You can also stick them in the fridge and let them soak for several hours or overnight.)When you're ready to make the fries, drain off the water and lay them on two baking sheet lined with paper towels. Blot them with paper towels to dry them. Heat a few inches of oil in a heavy pot to 300 degrees. In 3 or 4 batches, cook the potatoes for about 4 to 5 minutes per batch, or until the potatoes are soft. They should not be brown at all at this point! You just want to start the cooking process. Remove each batch and drain them on new/dry paper towels. Once all the potatoes have been fried at 300, turn up the heat until the oil reaches 400 degrees. When the oil's hot, start frying the potatoes in batches again, cooking until the fries are golden and crisp. Remove from the oil and drain on paper towels.Sprinkle fries with sea salt and dive in!

Steps:

• 1. Three obvious things are important on your journey to perfection – your choice of potato, your choice of oil and your choice of salt. For me, the Maris Piper potato wins every time, and you want to use nice large ones.
  2. On oil, sunflower and sunseed are very efficient, and many people swear by using groundnut oil. But, if you’re after flavour, cooking chips in beef tallow (rendered beef fat you can get from your butcher) gives you better flavour and colour – the choice is yours.
  3. Finally, on salt, being an Essex boy, in my house it has to be Maldon sea salt.
  4. So down to business: chop 800g of Maris Piper potatoes into finger-sized chips, leaving the skin on – don’t be too exact.
  5. Chip shops have massive industrial fryers, which you can’t recreate at home, so you need to use a large sturdy pan on a medium to high heat (unless you own a deep-fat fryer, of course). Your oil should be 8cm deep, but never fill your pan more than half full. If you don’t have a thermometer, use a raw chip, and as it starts to float and fry the temperature should be about 140°C, which is perfect for blanching.
  6. Use a large metal sieve to gently lower the chips into the pan for around 8 minutes, or until soft but not coloured, then remove to a tray to cool.
  7. Turn the heat up under the oil and return one blanched chip to the oil as a guide again. Once it’s floating and golden the temperature should be about 180°C, which is perfect for frying and will give you chips with those all-important crispy outsides and fluffy middles.
  8. At this stage you may want to cook your chips in 2-portion batches, so you don’t decrease the temperature of the oil too much or overcrowd the pan. Fry the chips until beautifully golden, then remove to a bowl lined with kitchen paper, shake around a bit, season with sea salt and serve right away.