ROCK CANDY RECIPE EASY RECIPES

Steps:

• Line a 15x10x1-in. pan with foil; butter the foil and set aside. In a large heavy saucepan, combine water, sugar, corn syrup and food coloring. Bring to a boil over medium heat, stirring occasionally. Cover and cook for 3 minutes to dissolve sugar crystals. , Uncover; cook on medium-high heat, without stirring, until a candy thermometer reads 300° (hard-crack stage), about 25 minutes. Remove from the heat; stir in cinnamon oil (keep face away from mixture as oil is very strong). Immediately pour onto prepared pan. Cool completely, about 45 minutes. , Break the candy into pieces using the edge of a metal mallet. Sprinkle both sides of candy with confectioners' sugar. Store in airtight container.

Steps:

• Line a sheet tray with a silicone baking mat and lay down 1 ice pop stick in the center. Set aside.
• Set a 4-ounce ladle over low heat about 2 inches above the flame and add the sugar. Stir with the chopsticks, swirling constantly until the sugar dissolves and turns pale light yellow (it should be fragrant like caramel and resemble diluted honey), about 2 minutes.  
• Stir in the baking soda and whisk vigorously for 5 seconds, still working 2 inches above the flame, and remove from the heat. Continue whisking until the baking soda is completely dissolved and the sugar doubles in volume, becomes frothy and turns light caramel color, about 10 seconds.  
• Pour the sugar immediately onto the tip of the ice pop stick on the silicone mat, scraping down with a rubber spatula. Keep a nice round shape as you pour as this will ensure the candy is pressed in an even circle. Quickly and lightly press down with hotteok press until the candy is about 3 1/2 inches in diameter, 3 to 5 seconds. As the candy begins to harden, gently lift the hotteok press and immediately stamp with a cookie cutter, making sure not to press all the way through, 5 to 10 seconds. Remove the cookie cutter and let the ppopgi cool until hardened, 2 to 3 minutes. If making more ppopgi, rinse the tools in hot water and dry completely before making the next batch.