PINT SIZE PLASTIC CONTAINERS RECIPES

Steps:

• Boil the soybeans for 1 hour to cook.
• Discard the cooking water and dry the beans (either using a towel to pat them dry or setting over low heat in the pot to evaporate the water off the beans). It is important for the beans to be dry to the touch, as too much moisture can ruin the batch.
• Place the beans in a dry bowl and allow the beans to cool to a lukewarm temperature (same temperature as your skin).
• Add the vinegar and mix well.
• Add the tempeh starter and mix well to evenly distribute the starter in the beans.
• Place the beans in two vented containers (or quart-size plastic bags with needle-size holes poked through at 1/2-inch intervals). The beans should be layered 1 to 1-1/2 inches thick.
• Incubate the beans at 85-91°F for 24 to 48 hours. For ideas, see our article on Incubating Tempeh. Verify the temperature using a thermometer inserted into the beans, rather than testing the temperature next to them.
• Check the beans after 12 hours. At this point in the process the fermentation will cause the beans to generate their own heat so you will normally need to reduce or even eliminate the external heat source. Be sure to use a thermometer to check the actual temperature.
• After 24 hours or so, the white mycelium will start to cover the surface of the beans. Over the next few hours the white mycelium will grow through the beans and will smell nutty.
• After 24 to 48 hours, when the beans have become a single mass held together by the white spores, the tempeh can be refrigerated.

Steps:

• Boil the soybeans for 1 hour to cook.
• Discard the cooking water and dry the beans (either using a towel to pat them dry or setting over low heat in the pot to evaporate the water off the beans). It is important for the beans to be dry to the touch, as too much moisture can ruin the batch.
• Place the beans in a dry bowl and allow the beans to cool to a lukewarm temperature (same temperature as your skin).
• Add the vinegar and mix well.
• Add the tempeh starter and mix well to evenly distribute the starter in the beans.
• Place the beans in two vented containers (or quart-size plastic bags with needle-size holes poked through at 1/2-inch intervals). The beans should be layered 1 to 1-1/2 inches thick.
• Incubate the beans at 85-91°F for 24 to 48 hours. For ideas, see our article on Incubating Tempeh. Verify the temperature using a thermometer inserted into the beans, rather than testing the temperature next to them.
• Check the beans after 12 hours. At this point in the process the fermentation will cause the beans to generate their own heat so you will normally need to reduce or even eliminate the external heat source. Be sure to use a thermometer to check the actual temperature.
• After 24 hours or so, the white mycelium will start to cover the surface of the beans. Over the next few hours the white mycelium will grow through the beans and will smell nutty.
• After 24 to 48 hours, when the beans have become a single mass held together by the white spores, the tempeh can be refrigerated.