ICING GLUE RECIPES

Steps:

• Put the sugar, syrup, butter and a pinch of salt in a saucepan set over a medium heat and bubble for 1-2 mins, stirring to combine. Remove from the heat and set aside. Tip the flour, bicarb and spices into a large bowl, pour over the warm syrup mixture and egg, stirring to combine. The dough will seem soft, but will firm up in the fridge. Cover and chill for at least 30 mins, or overnight. Will keep wrapped in the freezer for up to two months.
• Heat the oven to 200C/180C fan/gas 6 and line two baking trays with baking parchment. Dust the work surface with a little flour and divide the dough into two large balls. Roll each ball out to the thickness of a £1 coin and use the downloadable template to cut out the train parts A-D. You will need two A pieces, one B piece, two C pieces and three D pieces, plus 10 small wheels (about 2cm in diameter) and two larger wheels (about 4cm in diameter). Use biscuit cutters or the wide end of a piping nozzle to stamp out the wheels. Use what remains for gingerbread stars or people, if you like. Transfer all the pieces to the prepared trays.
• Bake for 10-12 mins, swapping the trays around halfway through, until slightly risen and golden brown. The gingerbread will expand as it bakes, so trim back into shape while still warm using a small sharp knife and the templates again. Leave to cool completely on the trays.
• For the decorations, mix the icing sugar with just enough water to make a thick icing the consistency of melted chocolate. Spoon into a piping bag and snip off the end, then draw windows on the A pieces, spokes on the wheel pieces and any other decorations you like, adding the sprinkles and balls while the icing is still wet.
• To assemble the driver’s carriage, use the icing to glue the two A pieces to the B piece (for the taller back of the carriage), then glue one of the D pieces to the front. For the second carriage glue the two C pieces together with two D pieces. Use cans to support the sides while the icing sets, if needed (at least 30 mins). Glue three small wheels to both sides of the second carriage. Glue one large wheel at the back of the driver’s carriage, on both sides, then two small ones beside those. Leave to set for another 30 mins.
• Use any leftover icing to decorate the train, sticking sprinkles and silver balls to its sides. Leave to set for a final 30 mins, then fill the carriages with the wrapped sweets. The assembled train will keep in an airtight cake tin or on display (covered overnight to protect from dust) for up to four weeks.

Steps:

• To make the roses, pinch off a little icing and roll it in the palm of your hands to make it more malleable. Shape the icing into an oval shape, smooth out one end of the oval to make it thinner so that it resembles the frilly part of the tip of a rose petal. Make 8-10 more rose petals in this way. To make a rose, roll a small ball of icing into a cone shape, then wrap a rose petal around it. Carefully press the remaining rose petals around the central petal to form a rose shape. You may need to ‘tease’ the petals out from each other a little bit.
• Carefully brush the edges of the roses with pink dust. Repeat the process until you have made about 15 roses. Set aside for 2-3 hours, or until the icing has hardened. (The roses can be made up to a month in advance and stored in an airtight container.)
• Preheat the oven to 160C/325F/Gas 3. Grease and line a 15cm/6in, 23cm/9in and 30cm/12in round cake tin.
• For the 15cm/6in tier, cream the butter, sugar and vanilla together in a bowl until well combined. Gradually beat in the eggs, one at a time, until well combined. Stir in the dried fruit, orange zest and treacle, then fold in the bicarbonate of soda, flour and spices until well combined. Spoon the mixture into the cake tin and bake in the oven for about two hours, or until a skewer inserted into the middle comes out clean.
• Repeat step 4 for the 23cm/9in tier and bake in the oven for three hours, or until a skewer inserted into the middle comes out clean.
• Repeat step 4 for the 30cm/12in tier and bake in the oven for 4½ hours, or until a skewer inserted into the middle comes out clean.
• When the cakes are cooked, remove them from the oven and set aside to cool for 15 minutes. Remove them from the tin and set aside on a wire rack to cool completely.
• Warm the apricot jam in a saucepan, then pass it through a sieve.
• Level the top of the 15cm/6in fruit cake, paint the top with a little apricot jam, then turn it upside down onto the 15cm/6in thin cake board. Using a piece of string, measure the top and sides of the fruit cake (this is so that you roll the marzipan out to the right size). Paint the fruit cake all over with the apricot jam.
• Dust a work surface with icing sugar and roll 500g/1lb 2oz of the marzipan out until it is large enough to cover the top and sides of the fruit cake (use the piece of string as a guide). Carefully lift the marzipan onto the cake and smooth it on with your hands. Trim off any excess marzipan, ensuring the cake board is also covered.
• Paint the cake with cooled, boiled water. Knead 500g/1lb 2oz of the white icing until soft and pliable and roll it out until it is 5mm/¼in thick and large enough to cover the top and sides of the fruit cake (use the piece of string as a guide). Carefully lift the icing onto the cake and smooth it on with your hands. Trim off any excess icing. Leave the cakes overnight so that the icing can dry (do not store the cakes in the fridge).
• Repeat steps 9, 10 and 11 for the 23cm/9in cake using 1kg/2lb 4oz each of marzipan and icing.
• Repeat steps 9, 10 and 11 for the 30cm/12in cake using 2kg/4lb 8oz each of marzipan and icing.
• Once the icing has dried, apply a thin line of edible glue around the bottom edge of each cake and carefully stick some ribbon around the cake, securing the join with a little extra glue.
• To insert the dowelling rods, hold a dowelling rod at the side of the 23cm/9in cake and mark with a pencil where the icing comes to. Cut the rod and three others to the same length. Push the rods into the cake about 5cm/2in away from the sides, to form the four corners of a square in the centre of the cake. Measure, cut and insert the rods in the same way for the 30cm/12in cake.
• To cover the 20cm/8in thick cake board, knead 400g/14oz of the icing until soft and pliable and roll it out until it is 5mm/¼in thick and large enough to cover the cake board. Spread a little glue over the board, then carefully lift the icing onto the cake board, smoothing it until flat. Trim the edges. Apply a thin line of glue around the edge of the cake board and carefully stick the ribbon around the cake, securing the join with a little extra glue.
• Repeat step 16 using 500g/1lb 2oz icing for the 28cm/11in cake board and 750g/1lb 10oz icing for the 35cm/14in cake board.
• If you’re transporting the cakes to a venue, it’s best to transport them separately and assemble the cake at the venue. To assemble the cakes, first stick the 30cm/12in cake to the 35cm/14in cake board: add a little glue to the middle of the 35cm/14in cake board, then position the 30cm/12in cake in the middle. Place four of the pillars on top of the largest cake, positioning each one over a dowelling rod. Top with the 28cm/11in cake board, and repeat the process with the 23cm/9in cake, finishing with the 20cm/8in cake board and the 15cm/6in cake. Using the edible glue, arrange the fondant roses in a cluster on the top of the cake and around the side of the 23cm/9in and 30cm/12in cake.