FRENCH FRIES SLICER RECIPES

Steps:

• Peel the potatoes. In a large mixing bowl, combine sugar, corn syrup, and hot water. Make sure the sugar is dissolved. Using a french fry slicer, cut the peeled potatoes into shoestrings. The potatoes should be 1/4" x 1/4" in thickness, and about 4" to 6" long. (You can do this with a knife, but it is alot of work).
• Place the shoestringed potatoes into the bowl of sugar-water, and refrigerate. Let them soak about 30 minutes.
• While they're soaking, pack the shortening into the deep fryer. Crank up the temperature to "full". The shortening has to pre-heat for a very long time. It will eventually liquify. After it has liquified and is at least 375°, drain the potatoes and dump them into the fryer. (be careful, it will be ferocious).
• After 1 to 1 1/2 minutes, remove the potatoes and place them on a paper towel lined plate. Let them cool 8 to 10 minutes in the refrigerator.
• While they're cooling, add the lard or beef drippings to the hot Crisco®. Again, crank the temperature to full. Stir in the lard as it melts into the oil. It will blend inches.
• After the deep fryer is reheated to 375°-400°, add the potatoes and deep fry again. This time for 5-7 minutes until golden brown. Remove and place in a large bowl.
• Sprinkle generously with salt, then "toss" the fries to mix the salt evenly.
• Serve hot, serve immediately, and enjoy! Depending upon the size of the potatoes, this recipe make about 2 medium sized fries.
• Special Notes: If you want more fries, double the recipe---but DON'T double the cooking oil. Just cook them in shifts, adding about 1/4 cup more Crisco® and 1 tablespoon lard for the second batch.

Steps:

• Peel the potatoes. In a large mixing bowl, combine sugar, corn syrup, and hot water. Make sure the sugar is dissolved. Using a french fry slicer, cut the peeled potatoes into shoestrings. The potatoes should be 1/4" x 1/4" in thickness, and about 4" to 6" long. (You can do this with a knife, but it is alot of work).
• Place the shoestringed potatoes into the bowl of sugar-water, and refrigerate. Let them soak about 30 minutes.
• While they're soaking, pack the shortening into the deep fryer. Crank up the temperature to "full". The shortening has to pre-heat for a very long time. It will eventually liquify. After it has liquified and is at least 375°, drain the potatoes and dump them into the fryer. (be careful, it will be ferocious).
• After 1 to 1 1/2 minutes, remove the potatoes and place them on a paper towel lined plate. Let them cool 8 to 10 minutes in the refrigerator.
• While they're cooling, add the lard or beef drippings to the hot Crisco®. Again, crank the temperature to full. Stir in the lard as it melts into the oil. It will blend inches.
• After the deep fryer is reheated to 375°-400°, add the potatoes and deep fry again. This time for 5-7 minutes until golden brown. Remove and place in a large bowl.
• Sprinkle generously with salt, then "toss" the fries to mix the salt evenly.
• Serve hot, serve immediately, and enjoy! Depending upon the size of the potatoes, this recipe make about 2 medium sized fries.
• Special Notes: If you want more fries, double the recipe---but DON'T double the cooking oil. Just cook them in shifts, adding about 1/4 cup more Crisco® and 1 tablespoon lard for the second batch.