FLAVORED OILS FOR CANDY RECIPES

Steps:

• Before you begin this recipe, please take a class from a professional on working with sugar. This is a skill that professional pastry chefs develop after years of experience. Working with sugar will burn your fingers so know before you start that your fingers will develop burn blisters. Place the sugar, vinegar and water in a saucepan over high heat. Insert a candy thermometer and cook until the sugar reaches 320 degrees F. Use a pastry brush to keep the inside of the saucepan clean as the sugar cooks or the sugar may recrystallize. To do this, dip a clean brush in cold water and brush the inside of the pan clean. Pour the cooked sugar onto 3 or 4 silicone baking mats. If you want to color and/or flavor the sugar with food colors and/or flavored oils, this is the time to do so. Add a few drops of color to the sugar. Mix with a wooden skewer. To get started, push the sugar from the sides toward the center. This process takes a little while. Try to keep the sugar divided by color. Use the mat to push the firm sugar around the edges toward the center. Use a folding motion to accomplish that task. The next step is to pick up the sugar with your hands. Place each color under the heat of the sugar lamp. Pull the sugar until it becomes glossy and the color is evenly distributed. You will need to pull the colors simultaneously. Keep them under the sugar lamp but keep an eye on them. The lamp can melt the sugar so it is important keep rotating it and folding it onto itself.
• Start with 2 pieces of colored sugar. I used red and green. Pull them into a rectangular shape that is about 1 1/2-inches wide by 3-inches long and 1/2-inch thick. Place the pieces side-to-side and let them stick together on the long side. Place a piece of white sugar that is about 1/2-inch wide by 3-inches long and 1/2-inch thick in the middle. Close the red and green around it. Roll it and twist it while pulling it. When it gets to the desired thickness, use a scissor to cut the length and shape into a cane. Allow to cool completely. The white is inside and will become apparent when eaten.
• Jacques? tips: Vinegar keeps the sugar from crystallizing. You will not taste the flavor. It serves as an acid in this recipe. Sometimes candy cane recipes contain corn syrup, which makes the sugar very dry and very hot. Adding corn syrup makes it more difficult to work with the sugar at home. Remember, the sugar is at 320 degrees F, and that will burn you. The ideal work surface is a silpat placed over cool marble or granite. If you do not have marble or stone, use wood. It is a good idea to use gloves to help protect your hands from the heat and to prevent burning.
• I use a special sugar box that includes a special heat source, If you don?t have one, you can work in front of the oven. Set the oven to 300 degrees F. Open the oven door and place the silpat on the oven door. It provides a similar effect to the sugar box heater.

Steps:

• Combine Jell-O, unflavored gelatin and citric acid in a medium microwave-safe bowl and stir to combine.
• Add the corn syrup and water, and stir gently with a soup spoon until all of the ingredients are blended together. Stirring too fast may add air bubbles to the mixture, so keep it slow and sweeping. Let the mixture sit for 5 minutes so that the gelatin can bloom.
• Stir the candy syrup gently again, then microwave it on high for 30 seconds. Stir it again, then zap it for another 15 seconds. Repeat heating it for 15 seconds 3 more times for a total heating time of 1 1/2 minutes. If air bubbles begin to form on the surface of the gelatin, stop heating and stir gently. You don't want any bubbles in the syrup if you can help it. Let the mixture sit for 10 minutes. Give the solution a gentle stir every couple of minutes and you should see it become clearer over time.
• Spray the bear molds lightly with oil spray.
• Pour the candy syrup into a measuring cup with a spout, then carefully pour the liquid into the bear molds. Don't fill each bear all of the way to the top. Leave a little room in each mold.
• Let the candy sit for 30 minutes, then put the molds into your refrigerator for another 30 minutes.
• When the candy is firm push each piece out of the molds and arrange them on a baking sheet or in a large storage container so that they are each standing upright. Let them sit this way for 48 hours, then lay them on their backs for 24 hours. This process will help the bears dehydrate so that they are chewy like the originals. Depending on your climate, your gummy bears may have shrunken enough after 72 hours. If not, leave them out for another day or two, until they are chewy. Toss them around every so often as they dry out. When they are chewy enough for you, seal them up in an air-tight covered container or zip-top bag. Keep them stored in a sealed container and they should last for a couple weeks.